There is an alarm!
The alarm system shows a GB Warning, and the BPTX black monitor has a Wrong Bunch Warning led RED
- First, check if the CTP CLOCK is LOCAL
- the CTP clock can be seen in the BPTX panel, on the lower left part
- if the clock is LOCAL, then this is the problem: ask the DAQ/CTP shifter to change it to BEAM if possible
- if the clock is already BEAM, than try to reset the Intensity FIFO
Wait a few minutes after reset to see if the problem is confirmed
- if the Wrong Bunch Warning is still red contact the BPTX experts and they will confirm if the warning is real or if it is due to wrong settings
--
OmbrettaPinazza - 02-Nov-2010