EricDIM produces some useful information to standard output when run, so it is useful to capture the output in a file. You can see it at the same time if you run it like this:
= $ cmsRun
EricDIM.cfg | tee Runxxxxxx_log.txt
This section of the output shows a hex representation of the HTR status word and LRB errors for each spigot of each FED. The LRB errors (if any) are displayed below the HTR status word. See
HTR documentation and
LRB documentation for complete details on what these bits mean.
Fed 711:
Fed 712: 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8240 8e40
Fed 713: 8000 8000 8240 8e40 8240 8e40 8000 8000 8240 8240 8e40 8e40
Fed 714: 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8240 8240
01 01 01
Fed 715: 8000 8000 8e40 8e40 8e40 8e40 8000 8000 8240 8240 8e40 8240
01
This section displays an analysis of the front-end data.
Subject to rapid changes due to current work!
The following conditions are histogrammed for each channel:
* Link data error (DV=0 or Err=1)
*
FED 714 HTR 1 all QIE = nDV/Err
FED 714 HTR 2
Ch 0 OK=871 nDV/Err=129
Ch 1 OK=975 nDV/Err=25
Ch 3 OK=974 nDV/Err=26
Ch 4 OK=933 nDV/Err=67
Ch 6 OK=962 nDV/Err=38
Ch 7 OK=956 nDV/Err=44
Ch 9 OK=977 nDV/Err=23
Ch 10 OK=914 nDV/Err=86
Ch 12 OK=948 nDV/Err=52
Ch 13 OK=994 nDV/Err=6
Ch 15 OK=964 nDV/Err=36
Ch 16 OK=925 nDV/Err=75
Ch 17 OK=208 nDV/Err=792
Ch 18 OK=500 nDV/Err=6 noData=494
Ch 19 OK=200 nDV/Err=8 noData=792
Ch 20 OK=221 nDV/Err=93 noData=686
Ch 21 OK=206 nDV/Err=2 noData=792
Ch 22 OK=205 nDV/Err=3 noData=792
Ch 23 OK=208 noData=792
--
EricHazen - 29 Jul 2008