Run number Particle type Energy [GeV] Eta Number of events Comments
1000919 Pedestal HG - 0.4 2k # Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000923 Pedestal MG - 0.4 2k # Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000930 pi 180 0.4 660 0 Tried LVL1 accept (added 60*25ns in the LARGOnline panel) Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000932 pi 180 0.4 10k 0 pions only Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000936 e+ 180 0.4 10k 0 beam crate data missing at the beginning
1000937 e+ 180 0.4 10k 0 5% electrons only Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000938 e+ 100 0.4 1.5k 0 low rate, open collimator Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000942 e+ 100 0.4 10k 0 70% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000943 e+ 100 0.4 10k 0 70% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000944 e+ 100 0.4 10k 0 70% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000945 e+ 100 0.4 10k 0 70% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000946 e+ 100 0.4 10k 0 70% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000947 e+ 50 0.4 10k 0 80% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000948 e+ 50 0.4 10k 0 80% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000949 e+ 50 0.4 10k 0 80% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000950 e+ 50 0.4 10k 0 80% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000951 e+ 50 0.4 10k 0 80% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000952 e+ 20 0.4 10k 0 75% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000953 e+ 20 0.4 10k 0 75% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000954 e+ 20 0.4 10k 0 75% e mismatch only at the end, only .writing file exists Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000955 e+ 20 0.4 10k 0 75% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000956 e+ 20 0.4 10k 0 75% e Inversion of FTO Front 3 and FT0 Back 0 FEBs
2463 RAMP HG - 0.4 25.6k # Inversion of FTO Front 3 and FT0 Back 0 FEBs
2464 RAMP HG PS - 0.4 1.6k # Inversion of FTO Front 3 and FT0 Back 0 FEBs
2465 RAMP MG - 0.4 0.5k # Mismatch at 564 Inversion of FTO Front 3 and FT0 Back 0 FEBs
2466 RAMP MG - 0.4 25.6k # Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000959 e+ 150 0.4 10k 0 no electrons, only muons Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000962 e+ 50 0.4 3k 2.5 cm Al 70% electrons Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000964 PED HG - 0.4 10k # Pedestals look bad: More noise in FT0 PS, FT0 Front 3 and FT0 Back 0 look like exchanged? Also a few more dead channels, slightly higher noise in FT1 PS. Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000969 PED MG - 0.4 2k # Same problems as HG run Inversion of FTO Front 3 and FT0 Back 0 FEBs
1000990 PED HG - 0.4 2k # OK
1000991 PED MG - 0.4 2k # OK
1000993 e+ 180 0.4 10k no material OK, 30% positrons
1000994 e+ 180 0.4 10k no material OK, 30% positrons
1000995 e+ 180 0.4 10k no material OK, 30% positrons
1000996 e+ 180 0.4 10k no material OK, 30% positrons
1000997 e+ 180 0.4 10k no material OK, 30% positrons
1000998 e+ 180 0.4 10k no material 30% positrons
1000999 e+ 180 0.4 10k no material 30% positrons
1001000 e+ 180 0.4 10k 2.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001001 e+ 180 0.4 10k 2.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001003 e+ 180 0.4 10k 2.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001004 e+ 180 0.4 10k 2.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001005 e+ 180 0.4 10k 2.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001006 e+ 180 0.4 10k 2.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001007 e+ 180 0.4 10k 2.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001008 e+ 180 0.4 10k 5.0 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001009 e+ 180 0.4 10k 5.0 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001010 e+ 180 0.4 10k 5.0 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001011 e+ 180 0.4 10k 5.0cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001012 e+ 180 0.4 10k 5.0 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001013 e+ 180 0.4 10k 5.0 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001014 e+ 180 0.4 10k 5.0 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001015 e+ 180 0.4 10k 7.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001016 e+ 180 0.4 10k 7.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001017 e+ 180 0.4 10k 7.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001018 e+ 180 0.4 10k 7.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001019 e+ 180 0.4 10k 7.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001021 e+ 180 0.4 10k 7.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001023 e+ 180 0.4 10k 7.5 cm Al (the backside of the Al plate is 6.5cm away from cryostat) 30% positrons
1001024 e+ 150 0.4 5k no material 4% positrons, mainly muons
1001026 PED HG - 0.4 2k #
1001027 PED MG - 0.4 2k #
1001028 e+ 50 0.4 10k 7.5 cm Al 75% positrons
1001029 e+ 50 0.4 10k 7.5 cm Al 75% positrons
1001030 e+ 50 0.4 10k 7.5 cm Al 75% positrons
1001031 e+ 50 0.4 20k 7.5 cm Al 75% positrons
1001032 e+ 50 0.4 20k 5.0 cm Al 75% positrons
1001033 e+ 50 0.4 20k 5.0 cm Al 75% positrons
1001036 e+ 50 0.4 20k 2.5 cm Al 75% positrons
1001037 e+ 50 0.4 20k 2.5 cm Al 75% positrons
1001038 e+ 20 0.4 20k 2.5 cm Al 75% positrons
1001039 e+ 20 0.4 20k 2.5 cm Al 75% positrons This run may have wrong energy in the AMI logbook (shifter error)
1001040 e+ 20 0.4 20k 5.0 cm Al 75% positrons
1001041 e+ 20 0.4 20k 5.0 cm Al 75% positrons
1001042 e+ 20 0.4 20k 7.5 cm Al 75% positrons
1001043 e+ 20 0.4 20k 7.5 cm Al 75% positrons
1001044 e+ 100 0.4 5k 7.5 cm Al Negative energy in Tile (DAQ problem, apparently; some time spent to solve?)
1001045 e+ 100 0.4 5k 7.5 cm Al 30% positrons, Tile problem solved
1001046 e+ 100 0.4 20k 7.5 cm Al 30% positrons
1001047 e+ 100 0.4 20k 7.5 cm Al 30% positrons
1001048 e+ 100 0.4 30k 7.5 cm Al 30% positrons
1001050 e+ 100 0.4 30k 5.0 cm Al 30% positrons
1001051 e+ 100 0.4 30k 5.0 cm Al 30% positrons
1001052 e+ 100 0.4 30k 5.0 cm Al 30% positrons
1001053 e+ 100 0.4 10k 2.5 cm Al
1001054 e+ 100 0.4 30k 2.5 cm Al
1001055 e+ 100 0.4 30k 2.5 cm Al
1001056 e+ 100 0.4 30k 2.5 cm Al
2000102 pi- 10 0.4 5k no material

-- VincentGiangiobbe - 16 Jan 2008

Edit | Attach | Watch | Print version | History: r2 < r1 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r2 - 2008-01-16 - VincentGiangiobbe
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    Main All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright &© 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback