To send PsReset (0x80) from TTCvi as asynchronous command (8bits), a command to return the signal to LOW (0x0) is required to send after sending user defined command(*).
In the MaulalTtc command, this procedure was implemented. But I missed it... As the result, PsReset signal was kept as HIGH, and the VME API could not take any JRC route to configure PP/SLB ASICs.
Width of the pulse is adjusted to more than 10usec using usleep(). (same way implemented in ManualTtc)
(*) User defined command
7th and 8th bits of asynchronous short command are assigned for user command. In case of TGC,