Link to Results | Compared Releases | Notes |
---|---|---|
HN | 510_pre1 to 500 | PASS. Some differences in FastSim is seen. 510 is discontinued. Do not worry about this series anymore! (Sam) |
HN | 500 to 500_pre7 | differences seen between FastSim vs FullSim in sampe version as in earlier tests. Differences between FasSim in the two version too. |
HN | 500_pre7 to 500_pre6 | PASS. Some diff in Fast vs Full sim in 500_pre7 just as in 500_pre6 to pre4. The TTbar sample was compared to 500_pre4 as there was no pre6 sample. |
HN | 500_pre6 to 500_pre4 | Pass. The differences seen between FastSim and FullSim in 500_pre is understood. |
HN | 500_pre4 to 500_pre3 | Pass. |
HN | 500_pre3 to 500_pre2 | Pass. |
HN | 442 to 441 | Pass. |
Special Alignment | 440 vs 440_special | Successful. HN announcement. |
WIP | HCAL Special GT V6 vs V6C | For last failed HCAL calibrations check. Jobs in CAF. Using 44_V6 tag to access all datasets was successful. Additional plots for Jeremy, METTask_CaloSETInpHF and METTask_CaloSETInmHF from HT sample. Stats are different. |
441 to 440 | Links to 441 announcement and RelVal datasets. |
|
HN Link | 550pre2 (central) to 440 | Completed. Notifed via RelVal HN. Links to last 440 announcement by Dayong and RelVal datasets. Significant diffference in the tracking observed in avaliable Single Mu FastSim with previous release. |
Link to Results | Compared Releases | Notes |
---|---|---|
HN | 442 to 441 | Pass. |
441 to 440 | Links to 441 announcement and RelVal datasets. |
|
2011-10-18 | 440 to 421 | REPEAT. Used Artur's suggestion and used 42X global tag. PF: MET shows significant difference in low MET and small difference in high MET. Some changes in tracking is visible in tcMET monitors. One of the 42X jobs failed. Resubmitted. Now these plots are updated with full stats. Both samples have equivalent number of events. Below are additions plots for the difference observed in MET and GenMET in pfMet. METResolution_GenMETTrue in log scale (eps), METResolution_GenMETTrue 42X to 44X ratio plot, MET comparison of 44X to 42X in log scale, and MET comparison of 42X to 44X ratio plot. |
2011-10-13 | 440 to 421 | Followup on differences seen only in DY samples in HadEInHE SumET etc. Comparison is made with comple dataset. It seems I had used START42_X tag for 42X DY sample. It should be START44_V5. But, jobs fail with this tag. They run fine with START42X tag!!!. Not sure why. Send email to Artur et. al. Here is the config file: RunAnalyzers-DYJetsToLL_TuneZ2_M_50_mad_tauola_cfg.py.txt |
2011-10-07 | 440 to 440_patch2 |
Link to Results | Compared Releases | Notes |
---|---|---|
HN | 5_0_0_g4emtest vs 500 | PASS. All plots are good except trackQuality in tcMET in TTbar. Seems to be like trackQuality in new EM TTbar sample give values beyond 0-30 range. Replied to Danilo's question about this. Also, Robert requested to keep KS test results for all plots. Code was design to choose the larger of the KS and Chi2 value to be displayed on the results. |
Results HN | HiPU Fasll11 vs Summer11 | Difference seen in expected. |
Special Charmonix 2012 HN | Special Fa11 Chamonix 2012 campaign, S6 vs Charmonix | Changes are undertood. |
Special Alignment | 440 vs 440_special | Successful. HN announcement. |
HCAL | HCAL Special GT V6 vs V6C | For last failed HCAL calibrations check. Jobs in CAF. Using 44_V6 tag to access all datasets was successful. Additional plots for Jeremy, METTask_CaloSETInpHF and METTask_CaloSETInmHF from HT sample. Stats are different. |
I | Attachment | History | Action | Size | Date | Who | Comment |
---|---|---|---|---|---|---|---|
eps | METResolution_GenMETTrue_Old2NewRatio.eps | r1 | manage | 14.0 K | 2011-10-19 - 05:32 | SamanthaHewamanage | METResolution_GenMETTrue 42X to 44X ratio plot. |
eps | METResolution_GenMETTrue_logScale.eps | r1 | manage | 11.4 K | 2011-10-19 - 05:30 | SamanthaHewamanage | METResolution_GenMETTrue in log scale (eps). |
eps | METTask_CaloSETInmHF.eps | r1 | manage | 41.1 K | 2011-11-04 - 18:14 | SamanthaHewamanage | METTask_CaloSETInpHF from HT sample. |
eps | METTask_CaloSETInpHF.eps | r1 | manage | 42.4 K | 2011-11-04 - 18:13 | SamanthaHewamanage | METTask_CaloSETInpHF |
eps | MET_Old2NewRatio.eps | r1 | manage | 12.7 K | 2011-10-19 - 05:34 | SamanthaHewamanage | MET comparison of 42X to 44X ratio plot. |
eps | MET_logScale.eps | r1 | manage | 11.3 K | 2011-10-19 - 05:33 | SamanthaHewamanage | MET comparison of 44X to 42X in log scale. |
txt | RunAnalyzers-DYJetsToLL_TuneZ2_M_50_mad_tauola_cfg.py.txt | r1 | manage | 2.9 K | 2011-10-17 - 20:49 | SamanthaHewamanage | This is the config files used for 42X DY sample validation. Does not run with START44_V5 tag. But runs with START42_X tag |