From moser@mppmu.mpg.de Mon Oct 25 12:40:51 1999
Date: Tue, 19 Oct 1999 15:26:02 +0200 (MET DST)
From: Hans-Guenther Moser <moser@mppmu.mpg.de>
Subject: Re: QA guidelines and reliability of QC data (fwd)

Hello,

Didier Ferrere asked me to distribute following mail to everybody
involved in QA and QC. It concernes some ATLAS documents concerning
QA and QC procedures which are discussed in the ATLAS db group.
Didier, as SCT representative in this group, asks for comments.
If QA and QC people in your group are not on this mailing list, please
forward the mail and send me their E-mail address, so that I can update
the list.

                    best regards, Hans-Guenther Moser


================================================================

---------- Forwarded message ----------
Date: Mon, 18 Oct 1999 18:56:30 +0200 (METDST)
From: Didier Ferrere <Didier.Ferrere@cern.ch>
To: Hans-Guenther Moser <moser@mppmu.mpg.de>
Subject: Re: QA guidelines and reliability of QC data (fwd)


Could you please find from the message below a remind of what I sent you
last time for confirming the documents:


> ATC-OQ-QA-5410   Manufacturing and Inspection of Equipment
> http://edmsoraweb.cern.ch:8001/cedar/doc.info?document_id=107236
> 
> ATC-OQ-QA-5420   Handling of Nonconforming Equipment
> http://edmsoraweb.cern.ch:8001/cedar/doc.info?document_id=107237


Didier

---------- Forwarded message ----------
Date: Fri, 15 Oct 1999 14:30:03 +0200
From: Fido DITTUS <Fido.Dittus@cern.ch>
To: atlas-production-database@atlas-lb.cern.ch
Subject: Re: QA guidelines and reliability of QC data

Dear Colleagues,

   with this e-mail I would like to remind those who were present at 
our last meeting (Oct. 6th) to circulate the documents discussed in
your (sub-)system communities for comments. You find the URLs again
in the message from Kathy, which I include here again for your 
convenience. Note that all users can make comments which are recorded 
in EDMS by clicking on "Write your comments" on the Document 
Information page. I should also remind you that at the next meeting
on Nov. 3d we would like to tag thes documents as "checked by 
Production databse WG" and pass them on to the TCSG for final approval.

 Fido Dittus

Kathy Pommes wrote:
> 
> Dear Collegues,
> At the next WG Meeting we would like to get your feedback on the
> following document :
> 
> ATC-OQ-QA-2032   ATLAS Institute Codes
> http://edmsoraweb.cern.ch:8001/cedar/doc.info?document_id=ATL-GE-QA-2032
> 
> ATC-OQ-QA-2040   ATLAS Part Identification
> http://edmsoraweb.cern.ch:8001/cedar/doc.info?document_id=ATL-GE-QA-2040
> 
> ATC-OQ-QA-5410   Manufacturing and Inspection of Equipment
> http://edmsoraweb.cern.ch:8001/cedar/doc.info?document_id=107236
> 
> ATC-OQ-QA-5420   Handling of Nonconforming Equipment
> http://edmsoraweb.cern.ch:8001/cedar/doc.info?document_id=107237
> 
> Note that all these documents can be found via the ATLAS QAP Page :
> http://atlasinfo.cern.ch/Atlas/TCOORD/TechCoord/organisational/quality/index.html
> 
> We remind you that the meeting will be held next Wednesday 6 Oct in Room
> 40-RD-10, starting at 14h00.
> The proposed agenda will follow later.
> Regards
> Kathy & Fido
>