SCT Testbeam:  Modules to be installed during August 2000

NOTE: All modules should be prepared in suitable boxes with SC99
standard signal and power connections at the latest by the day
before installation at H8.  Files in the SCT standard formats for
detector configuration, mask, trim and response curve should 
also be ready at this time.  Default configuration follows the
proposed standard module test settings except that the edge mode
should be 1 and the compression mode should be 0 (anyhit).  You
should also notify the maximum acceptable bias voltage in the
case of irradiated detectors.

Type    Name       Chips  Origin  Responsible	      From

B12	K3112	   12	  KEK	  Gareth (for Nobu)   Systemtest
(Unirradiated <100> detectors, unirradiated hybrid)

B12*    K3113 	   12	  KEK	  Nobu		      KEK
(Irradiated <100> detectors; unirradiated hybrid)

B12	RLT5	   12	  UK	  Peter P.
B12	RLK6	   12	  UK	  Peter	P.

B12*	RLT4	   12	  UK	  Lars
(Fully irradiated module)        

B12*	RLT9	   12	  UK	  Lars
(Irradiated detectors; unirradiated hybrid)

B12*    RLT10      12?    UK      Lars
(Irradiated <100> detectors; unirradiated hybrid)

F12     VAL1       12     Val.    Marcel

F12     FR_K152    12     FR      Peter Kodys
F12     FR_K153    12     FR      Peter Kodys
    
Anchor  Anchor2    4	  Melb.	  Gareth	
Anchor  Anchor3    4	  Melb.	  Gareth