SCT Testbeam:  Modules to be installed during June 2000

NOTE: All modules should be prepared in suitable boxes with SC99
standard signal and power connections at the latest by the day
before installation at H8.  Files in the SCT standard formats for
detector configuration, mask, trim and response curve should 
also be ready at this time.  Default configuration follows the
proposed standard module test settings except that the edge mode
should be 1 and the compression mode should be 0 (anyhit).  You
should also notify the maximum acceptable bias voltage in the
case of irradiated detectors.

Type    Name       Chips  Origin  Responsible	      Dates 

B12	K3103	   12	  KEK	  Gareth/Nobu         14-28 June
B12     KNEXT	   12	  KEK	  Nobu		      21-28 June
B12	RLT5	   12	  UK	  Peter P./Lars	      14-28 June
B12	RLK6	   12	  UK	  Peter	P./Lars       14-28 June
B12	SCAND1	   12	  Scand.  Lars		      14-21 June

B12*	RLT4	   12	  UK	  Lars		      21-28 June
(Fully irradiated module)        
B12*	RLT9	   12	  UK	  Lars		      21-28 June	
(Irradiated detectors; unirradiated hybrid)
B6*	CGH5	   6	  C/G	  Gareth/Daniela      21-28 June
(Separately irradiated hybrid and detectors)
B6*	CGH4	   3	  C/G	  Gareth/Daniela      14-28 June
(Unirradiated detectors; irradiated hybrid)

FO12	FR_K81	   12	  FR	  Peter K.	      14-28 June
FO12	FR_K152	   12	  FR	  Peter K.	      21-28 June
    
Anchor  Anchor2    4	  Melb.	  Gareth	      14-28 June
Anchor  Anchor3    4	  Melb.	  Gareth	      14-28 June