Introduction
This page contains information of the beam test from May 8-17 for 3D pixels and LGADs.
Useful Links and Documentation
General Information
- IP address of MAC run control PC (can be accessed with rdesktop or TightVNC etc. from CERN network): 128.141.149.168 (changes after re-starting the PC)
- To connect from outside CERN network: log in to your lxplus account. Then ssh -XY telescope@128NOSPAMPLEASE.141.149.168. Once connected to the PC, type "remmina &" to access the PCs in the beam area.
Updated information on 3D Setup
HSIO2 system: instructionsTO BE UPDATED*
- Installed HSIO2 software on IBL laptop (linux)
- network port eth1 (usb adapter) is set as internal network : ip 192.168.4.8
- network port em1 (on board) is set as dhcp server : ip 192.168.1.1 alias name rce3
- How to start-up RCE
- login two terminals to afpdaq:
ssh -X 192.168.4.8 -l afpdaq
- on first terminal :
ssh root@rce3 (root)
calibserver
- on second terminal :
source ~/devel/pixelrce/rce/scripts/setup-dev.sh
calibGui &
- How to run calibGui (or cosmicGui):
- How to run rceOfflineProducer for data taking with the ACONITE/AIDA telescope (instead of calibGui)
8
LGAD Setup
Add here info on scope, DAQ etc.
- Scope
- Agilent xxx
- IP address:
192.168.4.245
- Reset the scope: Open the start menu and at the search box type:
shutdown -r -f -t 0
- Turn on/off the motor drivers remotely
- Go to a browser with flash
- 192.168.4.211
- admin admin
- You can switch on/off separately 2 channels (now power plug 1 is used)
- Data folder in /eos/user/e/ecavalla/LGADmayTB/
--
JoernLange - 2017-05-03