Organisational details
-
Shift List
Intended Program
Modules
Module slot assignment
Testbeam
-
Automatic Scan Log
The Useful Run List
Drawing of Testbeam Environment Chamber geometry
Drawing of modules in beamline
Some photos from Peter Kodys
In-situ Module Characterisation
-
Detector IV (irradiated sensors) 25/8/2000
Logged detector leakage currents for irradiated detectors
A nice example threshold scan plot of the 12 modules
Configuration files used ---
st_system_config.dat
Logbook notes
19/8
20/8
21/8
22/8
23/8 ---
27/8 ---
30/8
31/8
Calibration run data files & plots (raw data)
27/8
30/8
31/8
Discussion of in-situ calibrations 27/8 and 30/8
Table of Recalculated Threshold Charges for strun 1407 (
All chips ,
Average 2 chips in beam ), and strun 1429 (
All chips ,
Average 2 chips in beam )
Spreadsheet comparing Response Curves Used vs In-situ
Noise vs Temperature Study 31/8
Analysis
-
Alignment and DST production
Alignment files
List of DSTs
HPSS notes
Module notes
-
Characterisation of irradiated modules in B186 Electro Stand
Characterisation of KEK modules (K3112 unirrad.; K3113 irrad.)
K3113 details
Operational equipment notes
-
Module temperature sensor table
Notes on the Temperature Sensing Multiplexer
Notes on the POLON CAN-bus HV System
Notes on the recovering from Module Trips